Selden A011 Selexel Super High Solids Metallised Floor Polish 5L

£12.95 £15.54 inc. Vat

Top quality metallised floor polish for extreme strength and durability coupled with ease of removability.

Non- yellowing cross linked polymer film. Does not discolour even the lightest floor. Produces a deep shine with excellent slip resistance. Responds brilliantely to all burnishing techniques.
Apply to a clean grease free floor. Strip old polisg with F32 Selate, then rinse thoroughly with clean water.

Allow the floor to dry.

Apply a thin even film with a lint free mop or applicatot. Best results will be achieved when two thin coats are applied, one after the other after the first coat is dry.

Initial drying time should be 30 minutes, speeding this up by heating the room will prevent the polish developing its maxium wear characteristics.
Do not spray burnish for at least 24 hours after first laying the polish.

For damp mopping use one of our range of floor gels.

For spray cleaning/burnishing a daily routine will increase selexels longevity.

SOLIDS:
25%

COVERAGE:
60 square metres per litre.

DILUTION:
Use neat. In very low humidity it is sensible to add up to 25% water to allow the full drying time.

COMPOSITION: A blend of Acrylic copolymers, resins and copolymers, resins and copolymer wax incorporating wetting agents and film forming aids in a stable water based emulsion form incorporating metal cross linking additives as well as an anti-static additive.
APPEARANCE: Translucent emulsion

COLOUR:
Cream
PH:
8.3

SOLIDS:
25%

ODOUR:

Characterisic slightly sweet

FREEZE/THAW STABILITY:
3 cycles
SHELF LIFE:
Two years minimum un opened containers at ambient temperature.

SKU: A011 Category: Brands: .